2. Can In-Pool Lounge Chairs Scratch or Damage a Vinyl Pool Liner?
Yes. Inappropriate furniture or improper handling can scratch, scuff, or puncture a vinyl pool liner.
However, the risk is not simply determined by whether a chair is heavy or light. Surface condition, contact points, trapped debris, and movement all play important roles.
The Coated Fabrics and Film Association (CFFA) identifies sharp objects and abrasive cleaning tools as potential causes of vinyl liner damage and premature wear.[1]
For pool owners, there are four situations worth paying particular attention to.
Dragging or Sliding Furniture Across the Pool Floor
This is one of the easiest mistakes to avoid.
Even if a lounge chair has a well-finished base, dragging it across the liner can create friction. Sand, grit, or small debris trapped underneath can make the situation worse.
Instead:
- Lift the chair slightly when repositioning it.
- Use two people when moving larger or heavier chairs.
- Check the pool floor before placing furniture.
- Avoid pushing the chair along the liner to adjust its position.
If a chair needs frequent repositioning, choose a model that is manageable for your pool setup.
Sharp Hardware and Damaged Components
Exposed screws, cracked plastic, rough edges, and loose components can become potential contact hazards.
Inspect your furniture regularly, especially after moving it, storing it, or taking it out of the pool.
Do not continue using a chair if you notice damaged contact surfaces or protruding hardware.
Sand and Debris Underneath the Chair
Small particles can be easy to overlook, particularly when the pool floor is not completely clean.
Before setting up your tanning ledge, remove loose debris from the placement area and check the underside of each chair.
Also, avoid placing loose ballast materials directly between the chair and the liner.
Improper Placement on an Uneven Surface
A lounge chair should sit flat on the intended tanning ledge.
If one part of the base is resting on a raised fitting, rough surface, or trapped object, the contact may become uneven.
Choose a flat placement area and check the chair's stability before use.